2004 ironhorse sgs

ly recipes call for Cane sugar or beet sugar (sucrose) but corn syrup or honey may be used to replace part of the sugar in jelly recipe s as well. Adding too little sugar may result in mold growth and spoilage. Medical Uses Petroleum jelly compounds are used in medical a nd pharmaceutical applications. These compounds create a moisture barrier for wound dressings and prevent contaminants from entering at the site of injury. It is also a substitute for emollients in lotions and cosmetics. Petroleum jelly is an oil-based product. It is tr royal invitation template free anslucent, yellow or white substance with little odor or taste. Insoluble in water, petroleum jelly compound has a heat point similar t o body temperature of roughly 100 degrees Fahrenheit. Industrial Uses In the telecom sector, jelly compounds are used in cabling lines. 2004 ironhorse sgs Certain telephone and telecom lines contain an electrical grade of petroleum jelly. The jelly provides thermal stability and a waterpr .

sion, and products for molding and casting.Building the Roaster 1 Roll the perforated aluminum lengthwise into a cylinder. The cylinder should be 36 inches long. Weld the adjoining edges together. Wear a welder's mask while welding. This is the rotisserie basket. 2 With tin snips, cut a circle out of 22-gauge stainless steel that measures 2 inches larger than the cylinder in diameter. Cut the stainless steel circle into an "X." This will become the inner support for the rotisserie basket. 3 Bend 1/2 an inch of each arm of the "X" to f 3d model web sites orm a 90-degree angle. Drill a hole into the middle of the "X." Use a drill bit that is the same size as the rotisserie arm included wi th the rotisserie kit. 4 Insert the four 36-inch aluminum bars into the rotisserie basket and space them evenly apart. Insert the inner 2004 ironhorse sgs support into the rotisserie basket to check the alignment of the aluminum bars. The bent edges of the inner support should align with .

sher and a nut onto the end of each bolt. Tighten each bolt using two adjustable wrenches to secure the aluminum bars to the rotisserie basket. 6 Drill a hole into the middle of each bent edge of the inner support. Insert the inner support and align the holes with the m iddle hole of each aluminum bar. Secure the inner support with ?-inch stainless steel bolts, washers and nuts. 7 Insert the arm of the rotisserie through the hole in the middle of the inner support. Position the arm so the tip (the part that is furthest away from the ro headless horseman 3d model tisserie motor) is aligned with the edge of the rotisserie basket. The other end of the arm should extend out of the basket. 8 Drill a hole into the middle of one of the stove pipe caps. Use a drill bit the same size as the arm. Insert this stove pipe cap onto the side 2004 ironhorse sgs of the basket at which the arm extends out. Drill holes into the side of the stove pipe cap and secure it to the basket with ?-inch sta .

2004 ironhorse sgs team | 2004 ironhorse sgs | 2004 iron horse sgs-team dh | chris jepson sgs